CO2 · Machines
Glowforge Pro, a 45W CO2
Glowforge rates the Pro tube at 45 watts. The cutting area is about 19.5 by 11 inches, and the Pro is a Class 4 laser.
- Laser
- CO2
- Wattage
- 45W CO2
- Work area
- about 19.5 × 11 in (495 × 279 mm)
- Specs checked
- 2026-11-18
What the maker says it can do
- Glowforge's spec page says the Pro cuts and engraves wood, leather, acrylic, cardboard, cork, fabric, paper, and more, and it prefers Proofgrade material for automatic settings.
- The same page lists glass, stone, and anodized aluminum as engrave-only.
- The Pro passthrough takes material up to 1/4 inch high, up to 20 inches wide, and as long as you want. The head still prints about an 11-inch slice at a time.
What it does not do, from the same sources
- It does not cut anodized aluminum. Glowforge lists that metal under engrave only, and their materials FAQ says the process discolors the metal rather than engraving it away.
- It is not a diode hobby laser you can treat casually. The spec page calls the Pro a Class 4 laser product. Plus and Basic are Class 1 on that same page.
- Glowforge says they will not give settings for custom materials. A forum post is not a Proofgrade preset.
Settings written for this machine
The page checked for this article is Glowforge’s Performance spec sheet, plus the Pro product page. The Pro is the 45-watt machine in that family. Plus and Basic are 40 watts on the same sheet.
Bed and passthrough
Glowforge prints these limits:
- Exterior of Pro, Plus, and Basic: 38 × 20.75 × 8.25 in (965 × 527 × 210 mm).
- Maximum material width: 20 in (515 mm).
- Cutting area: about 11 in deep and 19.5 in wide (279 × 495 mm).
- Maximum material height: 2 in (50 mm), or 0.5 in (13 mm) with the tray.
- Pro passthrough: material up to 1/4 in (6.3 mm) high, up to 20 in wide, and as long as you want.
- Maximum material depth is unlimited on the Pro. Basic and Plus stop at 18 in.
“Unlimited” means the slot, not an unlimited cut in one click. You still align each section. The spec page also says engraving can go up to 1,355 DPI, and that focus is measured by a low-power scan, with a manual focus option.
The tube line says a CO2 glass tube at 10,600 nm, rated at 45 watts for the Pro. Peak power consumption for Basic, Plus, and Pro is 800 W. The outlet line is 110/220 VAC, 50 or 60 Hz. Ventilation is their Performance filter, or a window within 8 feet. The filter is a separate product with its own 350 W peak.
Class 4
The spec page says the Pro is a Class 4 laser device and that it comes with safety training materials. Plus and Basic are Class 1 on that page. Do not treat the Pro like a closed Class 1 appliance just because the lid looks similar. Read Glowforge’s training before you run it.
What it will not number for you
Proofgrade material gets settings from Glowforge’s app. Everything else is “custom,” and their FAQ says they will not provide settings for it. The anodized aluminum page quotes forum posts and labels them as reports, not as Glowforge presets. The FAQ does say owners regularly engrave anodized aluminum, that the mark discolors the metal, and that the surface still feels smooth. It also says the machine cannot be used on galvanized metal.
Vinyl and PVC are out. That warning is on the safety page, with Glowforge’s wording.
Questions people ask
Is the Pro the same wattage as the Plus?
No. The spec page says the tube is rated at 45 watts for the Pro and 40 watts for the Plus and Basic. A setting copied from a 40-watt machine is a starting test on a Pro, not a match.
Do I get automatic settings for any plywood?
Automatic settings are for Proofgrade material, which the printer recognizes. Glowforge's FAQ says they cannot advise settings for custom material, and that some plywood glue is not laser-compatible. Ask the plywood maker, or use a sheet they have already called safe.
Sources
- Glowforge Performance series tech specs — Glowforge
- Glowforge Pro product page — Glowforge
- Safety, Glowforge Performance series — Glowforge
- Non-Proofgrade materials FAQ — Glowforge