Library

Materials

A material page says what the laser is doing to the sheet, and what must stay out of the machine. PVC and vinyl are never a test. Chlorine gas is the reason.

Material

Anodized aluminum

Anodized aluminum is an engrave. The laser lifts dye from the oxide. Glowforge says it does not cut the metal, and bare aluminum is a different job.

Material

Birch plywood, including 1/8 inch

Birch plywood is the usual craft sheet. Makers often publish a 3 mm or 1/8 inch row that also covers balsa, so the species still needs a test.

Material

Cast acrylic, and how it differs from extruded

Cast acrylic is the one that engraves frosty. Extruded acrylic cuts, and OMTech says the edge is more likely to melt and look gummy.

Material

Glass for engraving only

Glass is an engrave. A CO2 marks it. A blue diode goes through clear glass unless you add a dark coating. Nobody on this site is cutting glass.

Material

Slate coasters and blanks

Slate is an engrave-only stone for these machines. xTool's F1 FAQ names it for the diode. A cut speed for slate is not a thing this site will invent.

Material

Vegetable-tanned leather

OMTech says to laser vegetable-tanned leather only. Chrome-tanned leather and most faux leather stay out because of the fumes.