Material · Materials
Slate coasters and blanks
Slate is an engrave-only stone for these machines. xTool's F1 FAQ names it for the diode. A cut speed for slate is not a thing this site will invent.
- Also called
- rock slate coasters
Settings written for this material
Slate coasters are a dark stone that engraves light. The mark is the stone dusting to a paler color, not a deep carving. You wash the dust off. You do not expect the laser to slice the coaster in half.
xTool’s F1 FAQ says the diode can engrave slate. The product introduction’s diode list says shale, along with marble, jade, and ceramic. Those words are not interchangeable. A slate coaster follows the FAQ. If your stone is a sealed painted tile instead of slate, it is a different test.
Glowforge’s spec page puts stone in the engrave-only list, next to marble and ceramic tile. There is no Glowforge slate settings page here yet. Their app will not hand you a custom-stone preset. See their note on the Pro machine page.
Dust and focus
The Atomm project used for the F1 settings says slate is dusty, to wipe it before the job, and to wash the dust off with a soft brush afterward. It also says a blurry focus will not turn the engraving bright white. On an F1, focus is the red and blue dots overlapping, or a typed thickness. That project was made on a D1 Pro. Its F1 row is the author’s suggested start, which the settings page quotes without pretending it was logged on an F1.
A lacquer coat before engraving is that project’s optional trick for a darker background. It is not required, and a spray can in a closed laser room is its own fire problem. Glowforge tells you not to store flammable vapors in the same room as the machine. Let any coating cure fully, somewhere else, before the stone goes in.
Blank coasters are a common buy: slate coasters. Natural stone varies. Two coasters from one box can engrave differently. Test the back of one before you engrave the set.
Questions people ask
Can I cut a slate coaster?
No number on this site is a slate cutting speed. Glowforge lists stone as engrave-only. xTool's F1 FAQ lists slate as something the diode can engrave. Cutting stone is a different tool.
Why do two xTool pages use different rock words?
The F1 FAQ says slate. The product introduction says shale in the diode list. This site uses the FAQ's word for coasters, and the settings page still tells you to test the actual stone.
Sources
- FAQ on product information for F1 — xTool
- xTool F1 product introduction — xTool
- Glowforge Performance series tech specs — Glowforge
- Custom slate charcuterie board — Atomm