Material · Materials

Anodized aluminum

Anodized aluminum is an engrave. The laser lifts dye from the oxide. Glowforge says it does not cut the metal, and bare aluminum is a different job.

· About 1 min read

Also called
anodised aluminium

Settings written for this material

Anodized aluminum already has a hard oxide, usually dyed black, blue, red, or gold. The laser removes or bleaches that dye. You see the silver-colored metal underneath. You should still feel a smooth surface. If the card warps or the mark is a rough trench, you used far too much heat for a dye layer.

Glowforge’s spec page puts anodized aluminum in the engrave-only column, with titanium and glass. Their materials FAQ says owners do this often, that the metal is discolored rather than engraved away, and that galvanized metals are not laser-compatible. The Pro settings page quotes forum numbers and labels every one of them as a starting estimate, because the posts do not say Pro, Plus, or Basic.

xTool’s F1 introduction puts plated metal and painted metal on the diode list, and metal on the infrared list. It does not print an anodized power and speed. This site will not invent one. The infrared laser is the likely tool, and the test grid is how you find the square. A diode row from slate will overburn a dye layer or do nothing useful. Do not reuse it.

Powder coat on a tumbler is also a coating, and it is not this page. Coatings differ. A number for black anodize is not a number for a painted cup.

Cards and tags: anodized aluminum blanks. Check that the listing says anodized. A plain aluminum card will not mark the same way on a CO2.

Questions people ask

Will this cut a business card?

No. Glowforge lists anodized aluminum as engrave-only. Their FAQ says the process discolors the metal and the surface still feels smooth. A CO2 or a diode is not a metal-cutting laser.

Is bare aluminum the same?

No. Anodizing is a dyed oxide layer. Bare aluminum, mill finish, and galvanized steel are different. Glowforge says galvanized metal is not laser-compatible. Do not run a mystery metal because it looks silver.

Sources

  1. Non-Proofgrade materials FAQ — Glowforge
  2. Glowforge Performance series tech specs — Glowforge
  3. xTool F1 product introduction — xTool