Diode · Machines

xTool S1 40W enclosed diode laser

xTool's S1 user guide rates the 40W diode at 40 W, on a 19.61 by 12.56 inch work area. The 20W column on that page is a different bed.

· About 6 min read

Laser
Diode
Wattage
40W diode
Work area
19.61 × 12.56 in (498 × 319 mm)
Specs checked
2026-11-19

What the maker says it can do

  • The user guide rates this model at 40 W, with a 0.08 by 0.10 mm spot and a working speed of 600 mm/s.
  • The product page says the 40W, 20W, and 10W diodes cut paper, wood, leather, MDF, felt, and opaque acrylic.
  • That page's one-pass thickness table gives the 40W 15 mm of basswood plywood, 18 mm of cherry, and 15 mm of black acrylic.

What it does not do, from the same sources

  • xTool's S1 safety page says not to cut PVC, vinyl, or an unknown material, and it names polycarbonate among plastics that can release harmful smoke.
  • The product page's acrylic lines say opaque acrylic, and the thickness table says black acrylic. Clear acrylic is not that claim.
  • The 2W infrared column has no cutting thicknesses. xTool lists that module for engraving metal, plastic, and acrylic, not for cutting birch.
  • The user guide's 20W work area is 19.61 by 13 inches. This page is only the 40W column.

Check price on Amazon

As an Amazon Associate I earn from qualifying purchases.

Settings written for this machine

The listing checked on November 19, 2026 is the xTool S1. That page was out of stock the day it was opened. Confirm the wattage on the variant you buy. This article is the 40W diode, not the 20W, not the 10W, and not the optional 2W infrared head.

The spec table used here is the S1 user guide, which xTool marked updated on October 27, 2026. The guide still points at xTool Creative Space screenshots and says that software is no longer maintained. It tells you to use xTool Studio. The wattage and the bed in the table are what this page quotes.

What the user guide prints

For the 40W column:

  • Laser power 40 W.
  • Spot size 0.08 × 0.10 mm.
  • Working speed 600 mm/s.
  • Working area 498 × 319 mm (19.61 × 12.56 inches).
  • With the automatic conveyor feeder, 470 × 3000 mm, and the guide says extra conveyor rails are required.
  • Adapter output 25 V, 11 A.
  • Connection USB or Wi-Fi. Software XCS or LightBurn.
  • Weight 20 kg.
  • Size 765 × 561 × 183 mm without the riser base, and 765 × 561 × 268 mm with it.

600 mm/s is the motion rating. It is not a cutting speed for plywood. Cutting speeds live on the settings pages, and they are much slower.

The 20W column on that same table is a different machine for the purpose of this site. It is 20 W, a tighter 0.08 × 0.06 mm spot, 24 V at 8 A, and a work area of 498 × 330 mm (19.61 × 13 inches). If the module in your gantry is the 20W head, stop and do not use a 40W number.

Two xTool pages, two work areas

The store page’s 40W column prints the work area as 19.6 by 12.5 inches (498 × 319 mm). That matches the user guide’s millimeters. The inches are rounded.

The same store table’s second column is the 1064 nm infrared module, and it prints 19.6 by 13 inches (498 × 330 mm). The user guide never gives the infrared head its own bed. It assigns 498 × 330 mm to the 20W diode. This page does not average those sentences. The 40W work area used everywhere else here is 19.61 × 12.56 inches (498 × 319 mm).

A marketing line on the store page also says the bed is 23.93 by 15.16 inches and the work area is 19.6 by 12.5 inches. Those are a bed and a usable area, not two votes for one rectangle. Frame the job in the software before you promise a customer the larger pair.

The store FAQ, on the day checked, gives processing height as 42 mm with no riser, 125 mm with the Class 1 riser, 133.5 mm with the Class 4 riser, and 14 mm when the automatic conveyor feeder is in use. A 1/8 inch sheet is inside the shortest of those. A thick turning blank is not.

What the 40W is allowed to cut

The store page’s material table says the blue modules cut paper, wood, leather, MDF, felt, and opaque acrylic. Engraving adds stainless steel, bamboo, fabric, dark glass, ceramic, jade, marble, shale, cement, brick, and plated or painted metal. “Shale” is the word xTool printed. It is not a test of a particular stone.

The one-pass thickness table for the 40W says 18 mm cherry, 15 mm basswood plywood, 15 mm walnut, 15 mm black acrylic, and 0.1 mm stainless. The one-pass speed table says 15 mm/s for 3 mm basswood, 10 mm/s for 6 mm basswood, and 6 mm/s for 10 mm basswood. Those speeds do not name a power. They also do not say birch. The birch settings page is where that gap is handled, and it does not pretend the basswood cell was a birch test.

The 2W infrared module is a different laser. Its cutting cells on that thickness table are empty. xTool’s product FAQ says the infrared head engraves metal, plastic, and black acrylic. Do not put the infrared head on a plywood cut and expect the diode chart to apply.

Class 1, and the page that also says Class 4

xTool’s laser-safety training says the S1 is a Class 1 laser in normal closed use. Class 1, in that article, means the baseplate is installed, or a riser is on and its doors are closed, and you follow the manual. It says eyewear is not normally required in those conditions. The processing laser wavelength in that training is 455 nm. The red measuring spot is 650 nm.

The same article says the S1 works as a Class 4 laser when the riser that supports the conveyor feeder is in use. Class 4, in that write-up, is an eye and skin hazard, including scattered light, and it needs a laser safety officer’s own procedure. xTool’s goggle chart lists “xTool S1 (Class 4 model)” at 455 nm ± 5 nm, up to 40 W. This page does not pick which sentence wins. If the conveyor riser is on, treat the Class 4 sentence as the one that applies to that setup.

The S1 safety article says the lid interlock should stop the job when the lid is lifted, and it says not to defeat that switch. It also says not to run the machine with parts removed, and not to leave it unattended. The user guide tells you to put the exhaust hose out a window or into a smoke purifier. Smoke from a legal material is still smoke. Read safety before a plastic you cannot name.

What stays off this machine

PVC and vinyl are named on xTool’s own S1 safety page, along with other chlorine materials and unknown stock. Polycarbonate is in that same warning. This site does not publish a speed for any of them.

Clear acrylic is the other common miss. The diode lists say opaque acrylic, and the thickness table says black acrylic. A clear sheet is the wrong purchase for this blue laser.

Before a settings page

xTool’s material pages tell you to start from a listed material, and to try a similar one only when yours is missing. The 40W birch page does that in the open: the official 3 mm wood cut is basswood, and birch is marked as a starting estimate. A 20W basswood speed from the same table is not a shortcut. Neither is an OMTech CO2 row.

Questions people ask

Is the 20W module this same page?

No. The user guide prints 20 W, a 0.08 by 0.06 mm spot, a 24 V 8 A adapter, and a work area of 498 by 330 mm. The 40W row is 25 V 11 A and 498 by 319 mm. A speed printed for the 20W module does not belong on a 40W job.

Do I need laser glasses with the lid closed?

xTool's safety training calls a closed S1 a Class 1 laser when the baseplate is in, or when a riser is used with its doors shut. The same page says the conveyor-feeder riser runs as Class 4. A goggle chart on another xTool page lists an S1 Class 4 model at 455 nm. Match the base you actually installed, and leave the lid closed. The safety article says the job should stop if the lid opens.

Sources

  1. xTool S1 user guide — xTool
  2. xTool S1 product page — xTool
  3. xTool S1 laser safety officer training — xTool
  4. S1 safety first — xTool
  5. Safety goggles selection — xTool